3D printing Resin by Fun To Do
We can bring you the best prices available on FunToDo resins and if you order before noon to an Irish address you can get it the next working day . If you have any questions about these resins please feel free to email us.
About FunToDo Resins
All our resins are designed to be ultra fast!
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard Dlp printers with an average light source of around 240Watts.
A broad range of reactivity!
The resins have a very broad range of reactivity, it extends from the very short wavelengths of 225nm to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiaters and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! and it will work fast!
The Fun To Do resins have an ultra low shrinkage!
Where 3.5% is regarded as little shrinkage, we have the limited the shrinkage to 0.5%.
Basically what you see is what you get with our resins. 3.5% seems to be small but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.
A natural resistance to water and most chemicals!
Our resins have a natural resistance against water, in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve our resins. Especially the Industrial blend as it has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here
User Friendliness makes you want to build more!
When designing our resins we have put quite some effort into making the resins as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.
Affordable resins make it possible for you to build more!
By using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times and material thickness without having to think about the costs of the materials all the time.